Libre Antenne

Parce que les paroles s'envolent, les écrits restent ici.

Vous n'êtes pas identifié(e).


#1 2020-11-25 04:48:45

Inscription : 2020-05-18
Messages : 406

Box Series Metal Ceilings from CertainTeed Ceilings

Box Series Metal Ceilings from CertainTeed Ceilings

The Box series of metal ceiling systems deliver both style and sustainability to any commercial project. To get more news about perforated metal ceiling, you can visit official website.

Featuring crisp module definition, and made with up to 92% recycled materials, this versatile system works well for both interior and exterior applications.

The key feature of this system is the universal carrier. The benefit is simple design and installation.In this article Andrea Dallan introduces the Dallan D93 roll forming system for the production of ceiling linear slats.

Metal ceilings with linear slats is one of the products that have made Dallan company successful worldwide for its compact, versatile and extremely easy to use systems.Today we are in front of the Dallan D93 punching and rollforming system, which produces the complete range of linear slat ceilings, as well as accessory profiles such as the perimeter angle and the carrier.

This Dallan system starts with a decoiler and continues with a punching system which is primarily used for pre-punching the carrier. The shape of the carrier is adapted to the different types of slat ceilings we will produce. This same press can be also integrated to the machine bench and it can be used for several other profiles, such as the perforated angle beads for plasterboards.Then we have the Dallan combi rollforming system: the basement of the machine is a flat bench with centering system, while the sets of rollers are assembled in the Dallan combi system. These cassettes are interchangeable and hold all the rollers for the production of one profile and they can be changed in a matter of minutes.

Different widths of slat ceilings can be obtained from the same set of rollers, by introducing specific spacers.

Finally, the flying shear cuts the profiles at a speed up to 30 meters per minute in the standard version, while special set ups reach a speed up to 60 meters per minute.

Hors ligne

Pied de page des forums